In recent years, the market of stele carving, stone statue carving and stone ornaments has been developing at a growth rate of 30-46%. How to improve the processing efficiency? Stone carving machine plays an important role in it. So how to choose stone carving machine?

石材雕刻機廠家墨源為你詳細介紹，石材雕刻機選擇主要有以下5個關鍵點：

Stone carving machine manufacturers ink source for your detailed introduction, stone carving machine selection mainly has the following five key points:

1，雕刻機功率

1. Engraving machine power

石材雕刻機的電機有大功率和小功率之分，有些雕刻機的功率只適合做木工雕刻和廣告雕刻，石材由于硬度比較大，功率基本都在4.5——5.5KW，這種大功率雕刻機也分為兩類：一類是負面始終的雕刻機，這種雕刻機一般加工比較精細的標牌，這種雕刻機對精度要求比較高；另一類是大幅面的切割，負面一般在1米以上，但這種雕刻機的精度相對較差。

The motor of stone carving machine can be divided into high-power and low-power. The power of some carving machines is only suitable for woodworking carving and advertising carving. Due to the relatively high hardness of stone, the power is basically 4.5-5.5kw. This kind of high-power carving machine can also be divided into two categories: one is the carving machine, which generally processes relatively fine signs. This kind of carving machine has high precision requirements Relatively high; the other is large format cutting, generally more than 1 meter, but the accuracy of this engraving machine is relatively poor.

2，雕刻機電機

2. Engraving machine motor

雕刻機的雕刻頭電機也是石材雕刻機非常關鍵的一個部件，電機也是直接影響到雕刻機的使用性能。另外，還需要注意的一點是，雕刻頭電機的速度是否可調，如若可以，那說明雕刻機的雕刻范圍更廣，應用面也就越大，因?yàn)榈窨滩煌牟牧媳仨氂貌煌牡窨填^轉速。

The carving head motor of carving machine is also a key part of stone carving machine, and the motor directly affects the performance of carving machine. In addition, it is also necessary to pay attention to whether the speed of the carving head motor is adjustable. If so, it means that the carving range of the carving machine is wider and the application area is larger, because different materials must be carved with different carving head speed.

3，裝配工藝

3. Assembly process

大功率的石材雕刻機要求本體一定要精密和穩定，奧德星石材雕刻機用的是重型鑄鐵床身，確保雕刻的穩定性和加工精度。

High power stone carving machine requires precision and stability. Odyssey stone carving machine uses heavy-duty cast iron bed to ensure the stability and processing accuracy of carving.

以上就是小編為大家介紹的關于石材雕刻機的相關內容，希望可以幫助大家，更多的精彩內容請關注：http://www.peggw.com

The above is the related content of stone carving machine introduced by Xiaobian. I hope it can help you. For more wonderful content, please pay attention to: http://www.peggw.com